GENERGY TENERIFE 7500W Instrucciones De Uso página 67

• Single-phase equipment (230V) connected to the generator does not work:
The display shows 230V voltage?
YES
On the control panel there is
any circuit breaker in OFF
position?
Is the overload indicator
activated?
If the engine continues without generating electricity, contact our
Technical Assistance Service: spv@sg-group.es
Check if the equipment
connected to the generator
has any failure.
NO
YES
NO
YES
65
Place it in the ON position
Stop the generator,
disconnect all equipment
from the load and start again.