Selecting A Track Directly In The Current Folder; Introduction Of Advanced Built-In Cd Player (Mp3/Wma/Aac/Wav) Operation - Pioneer DEH-P7750MP Manual De Operación

Section
06 MP3/WMA/AAC/WAV Player
! When playing back files recorded as VBR
(variable bit rate) files, the play time will not be
correctly displayed if fast forward or reverse
operations are used.
! There is no sound on fast forward or reverse.
! When an MP3/WMA/AAC/WAV disc is in-
serted, folder name and file name automati-
cally begin to scroll in the display. When Ever
Scroll is set to ON at the initial setting, folder
and file name scroll continuously. About Ever
Scroll, refer to Switching the Ever Scroll on
page 51.
Selecting a track directly in
the current folder
When using the remote control, you can select
a track directly by entering the desired track
number.
! You cannot operate this mode from func-
tion display.
1 Press DIRECT.
Track number input display appears.
2 Press NUMBER buttons to enter the de-
sired track number.
# You can cancel the input number by pressing
CLEAR.
3 Press DIRECT.
The track of entered number will play.
Note
After entering the number input mode, if you do
not perform an operation within about 30 sec-
onds, the mode is automatically canceled.
22
En
Introduction of advanced
built-in CD player (MP3/
WMA/AAC/WAV) operation
1
1 Function display
Shows the function status.
1 Press Multi-Control to display the main
menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2 Use Multi-Control to select FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.
3 Turn Multi-Control to select the func-
tion.
Turn Multi-Control clockwise to switch be-
tween the functions in the following order:
Play mode (repeat play)Random mode
(random play)Scan mode (scan play)
Pause (pause)Compression (compres-
sion and BMX)Search mode (search meth-
od)
# You can also switch between the functions in
the reverse order by turning Multi-Control coun-
terclockwise.
# To return to the playback display, press BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.