Yakima SmarT-Slot Kit 5 Manual De Instrucciones

t-bolt (2X)
boulon en T (x 2)
tornillo en T (2X)
1
When
necessary
remove
an
endcap
from
each bar.
3
APPLY PADS TO THE TOPWATER PLATES.
Peel the pad from the backing.
Align the edge of the pad with
the edge of the plate and press it
into place making sure the holes
on the pad and plate line up.
4
Pour le français, allez à la page 2.
Instruction #1035976B-1/2
pad (2X)
coussinet (x 2)
almohadilla (2X)
2
2X
Place the TopWater box on your crossbars. Align the t-bolts with the slots.
Place the TopWater plates over the t-bolts as shown using the middle hole of
the plates. Then thread a knob on each t-bolt and fully tighten to 2 Nm.
SmarT-Slot Kit 5
HD Bar
X Nm
Para español ir a la página 2.
For use
with Yakima
TopWater.
Slide a t-bolt into
the slot on each
crossbar. For use on
HD Bar, first remove
the top infill.
2 Nm
2X
2X