Nogueira HAYNOG-300 Manual De Instrucciones página 8

Safety
- If you notice any abnormality In the operation:
vibrations, different noises, etc., turn off the
machine immediately. Check and eliminate the
cause before turning on again.
- Never operate the machine in closed
surroundings and without ventilation, the gases
released from the tractor motor are highly
poisonous to your health.
- Do not use the driveshaft without the safety
shielding.
- Make sure the rotation direction of the power
take-off marked on the machine is correct before
connecting the power take-off! The rotation of the
power take-off can never exceed 540 rpm.
- The tractor must always be maneuverable.
Place enough counterweights on the tractor, so
the front tires stay in firm contact with the ground.
- Be especially careful when operating on sloped
terrain. If you notice any imbalanced signs,
reduce acceleration. Keep the tractor always
engaged when going down slopes.
- Be especially careful when coupling and
uncoupling the machine from the tractor. Pay
attention and check if the coupling pins are well
latched. Use cotter pins so that the pins do not
come loose accidentally.
8
Instructions Manual
- When driving the tractor with the machine on
public roadways, obey the current valid
legislations regarding the maximum height of
the load, especially when going under
overpasses and bridges.
- As stated in the Brazilian Traffic Code (CBT), it
is required to have a National Driver's Licence
(CNH) for driving tractors on public roadways.
- Never leave the tractor when the machine is
turned on. Stop the motor, disconnect it from the
power take-off, engage the parking brake, and
remove the key from the ignition before getting
out.
- After turning off the machine, it takes some
time for it to stop turning. Never approach the
moving rotors. Only after you are completely
sure the rotors are motionless.
- Be prepared in case of an accident. Keep a
first-aid kit in an easily accessible location. And
know how to use it.
- Comply with the safety recommendations and
pay attention. Any lack of attention while
operating the machine can cause accidents.