Publicidad
Enlaces rápidos
Publicidad
Manuales relacionados para Bestar AK-MA01D
Resumen de contenidos para Bestar AK-MA01D
- Página 1 AK-MA01D Dual Monitor Arm Support pour moniteur double Brazo para dos monitores...
- Página 2 Cautions / Avertissements / Advertencias Make sure the surface is stable before mounting any clamp base or grommet base monitor arm. If you want to change the LCD monitor, be sure to ALWAYS adjust the spring arm to the lowest force setting.
- Página 3 Step 1 / Étape 1 / Paso 1 1- Place the monitor face down on a flat surface. Make sure not to scratch the monitor screen. 2- Attach the Monitor Mount (part E) to the back of the monitor using a Phillips screwdriver and the M4 screws provided (part G).
- Página 4 Step 2 / Étape 2 / Paso 2 Choose your montage / Choisissez votre montage / Elija su montaje Option 1 / Option 1 / Opción 1 With clamp / Avec pince / Con pinza 1- Adhere the Base Cushion (part F) to underside of the Riser (part A). 2- Tighten to desktop in the desired location using the turn knob.
- Página 5 Step 2 / Étape 2 / Paso 2 Choose your montage / Choisissez votre montage / Elija su montaje Option 2 / Option 2 / Opción 2 Without clamp / Sans pince / Sin pinza 1- In case you have a thick table top, please use the M6 Hex Key (part H) to loosen the screw under the base (part A) 2- Remove the clamp (part A) 3- Use the hexagonal head cap screw for fixation.
- Página 6 Step 3 / Étape 3 / Paso 3 1- Insert the Dual Adapter (part I) into the Riser (part A). 2- Insert the Extension Arms (part B) into the Dual Adapter (part I). 3- Using the M2.5 Hex Key (part H), tighten the set screw on the Riser (part A) and on the Dual Adapter (part I) to desired tension.
- Página 7 Step 4 / Étape 4 / Paso 4 1- Insert the Spring Arms (part D) into rhe Extension Arms (part B). 2- Using the M2.5 Hex Key (part H), tighten the set screws on the Extension Arms (part B) to desired tension. 3- Run the monitor cables through the built-in clip in the Spring Arm (part D) and the slide-off/on wire manager of the Extension Arms (part B).
- Página 8 Step 5 / Étape 5 / Paso 5 1- Slide the Monitor Mounts (part E) onto the Spring Arms (part D). 2- You can run the monitor wires through the wire managers locaed on the Spring Arm (part D) and the Extension Arm (part B). 3- Slide off the bottom side of the Extension Arm (part B) to place wires.
- Página 9 Step 6 / Étape 6 / Paso 6 1- Using the M5 Hex Key (part H), turn the weight adjustment screw on the Spring Arm (part D) in the appropriate direction to increase or decrease the supporting weight. 2- Using the M4 Hex Key (part H), tighten the tilt adjustment screw on the back of the Monitor Mount (part E).