Remote Kit Installation
Install Remote Control Receiver
1. Insert the plug connector on
the remote control bracket into
the connector on the fireplace.
(Figure 4)
2. Place antenna under remote
bracket.
3. Locate and install the two
screws on the remote control
bracket.
4. Replace the log by inserting
front edge and pushing the
back down until rear tab snaps
under back ledge (Figure 2)
and the logs are resting against
mirror.
5. Replace log grate using two
screws previously removed.
6
Figure 4
Remote Control Receiver
Figure 5
Manual Controls & Indicator Lights
Connector
www.empirecomfort.com
Plug