Remote Control Usage - Empire EFRC Guia De Instalacion

Operation

Remote Control Usage

The remote control operation can
be adjusted, depending on the
season and desired effects, by
toggling the main mode selector
switch built into the fireplace.
The position of the switch will
dictate the available functions
that the remote transmitter will
cycle through.
A. On Button
Pressing this button toggles
sequentially through the three
levels of the fireplace.
• Mode Selector Set at "O":
Only Flame Effect at all 3
levels.
• Mode Selector Set at "--":
Pressing once activates Level
1 - flame effect only, two and
three times activates Level 2 -
flame effect and Fan.
• Mode Selector Set at "=":
Pressing once activates Level
1 - flame effect only, twice
activates Level 2 - flame
effect and Fan, three times
activates Level 3 - flame
effect, Fan and heat.
B. Off Button
Pressing this button at any time
will shut the unit off.
8
C. Manual Selection Switch
Switches the operation of the
fireplace between the different
modes of the fireplace:
• OFF (center): Makes the unit
inoperable.
• MANUAL (top): All functions
of the fireplace are controlled
by the On and Off buttons as
described above (A, B).
• REMOTE (bottom): All
functions of the fireplace are
controlled by the Remote Control.
D. LED Indicators
Depicts which of the three (3)
levels the fireplace is currently
operating at: Level 1 -
2 - or Level 3 -
, Level
.
www.empirecomfort.com