Using The Trimmer - EDM 07529 Instrucciones De Uso

INSTRUCCIONES IMPORTANTES DE SEGURIDAD
07629
REF.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
LOAD THE MACHINE
Make sure the trimmer is turned off.
1. Connect the appliance plug to the appliance plug.
2. Connect the adapter to a household power outlet.
Verify that the charge status lamp illuminates.
Charging is completed after approx.
1 hour.
3. Unplug the adapter when the charge status light stops glowing.
The recommended ambient temperature for charging is 0ºC-35 . Battery
performance may decrease at extremely low temperatures and the
battery may not charge properly.
A full charge supplies enough power for approximately 50 minutes of use.
The method of operation and the ambient temperature.
When charging the trimmer for the first time or when it has not been in
use for more than 6 months, the main body lamp may not illuminate for
a few minutes, or the operating time may shorten. Please charge it for
more than 8 hours in such cases.

USING THE TRIMMER

Make sure the trimmer is turned off.
We recommend using the trimmer in an ambient temperature range of
0-35 . If used outside this range, the appliance may stop working.
1. Mount desired comb attachment and adjust cutting height as needed.
(See page 11.) Can also be used without the comb attachment. (Cutting
height: about 0.5mm)
The actual length of hair will be a little longer than the height you set.
2. Press the power switch to turn on the power.