Culligan S-H200-C Manual Del Usuario página 4

INSTALLATION
• Installs on standard 1/2˝ threaded shower arm.
• This shower head will not function without a filter cartridge in place.
1
Remove existing showerhead
from shower arm by turning
counterclockwise.
3
HOLD
LOOSEN
Hold the body of the
pivot assembly firmly
in one hand. With the
other hand, turn the
ribbed ring behind the
face counterclockwise
to unscrew.
2
Clean any debris that may be
present on the threads.
Wrap plumbers tape tightly
around shower arm threads.
4
REMOVE STICKERS
FROM BOTH SIDES
OF NEW CARTRIDGE
BEFORE INSTALLING.
Place new filter into
postion by pushing
cartridge down into
cavity until seated.
4
5
HOLD
TIGHTEN
Hold the body of the
pivot assembly firmly
in one hand. With the
other hand, turn the
ribbed ring behind the
face clockwise until
tight.