TACKLIFE T6 Manual Del Usuario página 5

Jump Start 12V Vehicle Instruction:
Connect the blue plug of jumper cable to the host and make
1.
sure the Cable Indicator is off.
Connect jumper cable correctly to the vehicle battery: red
2.
clamp to the positive (+) battery terminal, black clamp to the
negative (-) battery terminal.
Operate as following instruction of the Cable Indicator:
3.
GREEN LIGHT on:
Connection is correct and the
circuit is working, can be used
as emergency start.
GREEN LIGHT blinking with
buzzing:
Voltage of vehicle battery is
low. Please press the "BOOST"
Beep,Beep
button and start car within 30s
after GREEN LIGHT becomes
solid.
Beep,Beep
- 03 -
BOOST
reverse correct
RED LIGHT on with buzzing:
Connection is reversed. Please
reconnect and wait to start the
unit with GREEN light on.
No Lights on, No Buzzing:
Vehicle battery might have been
completely damaged.
make sure the connection is right,
then press the "BOOST" button
and start your vehicle within 30s
after the GREEN light becomes
solid.
Please