Troubleshooting - TACKLIFE T6 Manual Del Usuario

G. TROUBLE SHOOTING:
If the following Remedies can not solve your problem, please stop using T6 and
contact the merchant who you bought it from.
Finding
No response
when pressing
the switch button.
H. COMPOSITIONS AND AMOUNT OF TOXIC AND HARMFUL
SUBSTANCES IN T6 JUMP STARTER:
Pb
O
O：Indicate all homogeneous materials'hazardous substances
content are below the MCV limit specified in the Standard 2002/95/EC(RoHs).
I. Warning:
01. Read the user manual carefully before using this unit.
02.
Jump start 12V vehicles only. DO NOT hazard to use it to aircraft or ship that has
overloaded engines.
03. DO NOT use this unit if any clamp or cord is damaged.
04. DO NOT use it in place of a vehicle battery.
05. DO NOT use it as a battery charger.
06.
Never leave it connected to the vehicle battery after cranking your car successfully.
07. Use the jumper cable provided with the unit only.
08. Make sure the BLUE plug of the jumper cable is fully inserted into the jumping
socket. Otherwise, the BLUE plug would be melted.
09. Make sure all the battery connections are clean and well connected before
jumping start. If the vehicle battery is too dirty or over corroded, the unit may not
work as so powerful.
10. DO NOT jump start more than 3 times in a row. It could damage the unit by
overheat. Let it cool down for 2 minutes before next round.
11. DO NOT connect the positive and negative pins together when it is power on.
Cause
Low voltage protection of
T6 cut off the circuit
TOXIC AND HARMFUL SUBSTANCES
Hg Cd
O O
Remedies
Recharge the unit to activate it.
Cr（Vi）
O
- 06 -
PBB PBDE
O O