Eldom WRK2500 Manual Del Usuario página 15

Robot planetario mezclador
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
Do not use the appliance, if the knife is damaged.
Do not sharpen blades. Replace them, if they do not cut properly
or if they are worn out.
Do not touch the knife when the appliance is in operation. When
the appliance is unplugged, wait until the knife stops revolving
before touching it.
Use only with the originally included accessories.
The power cord and the whole appliance should be regularly
checked for damage. Do not switch the appliance on, if any da-
mage has been found.
Do not use the appliance, if the power cord is damaged or if the
appliance fell down or was otherwise damaged. The appliance
should be repaired by an authorised Service Centre; a list of Servi-
ce Centres can be found in the attachment and on the website
www.eldom.eu.
The appliance can be repaired only in an authorised Service Cen-
tre. Any modernisation or application of spare parts or elements
other than the original ones is forbidden and dangerous for the
user.
Remove and safely dispose of the packaging materials and the la-
bels before first using the appliance
To eliminate the risk of small children's choking, remove and safely
dispose of the protective cover on the appliance's power plug.
Do not place the appliance near benches or table edges when it
is operating. Make sure that the surfaces are even, clean and free
from water and other substances. Vibration during operation can
cause the appliance to move.
Do not use the appliance on a draining board
Take special care when taking out food from the bowl, making
sure that the motor and flat beater, whisk, or dough hook have
completely stopped. Make sure that the rotational-speed knob is
in the "0" position, and remove the power plug from the wall soc-
ket, before unlocking the mixer head and placing it in the raised
position (vertical). The flat beater, whisk, or dough hook should
15

Publicidad

Tabla de contenido
loading

Tabla de contenido