Publicidad
QCS3000: Monitor cable and power cords enter computer enclosure through grommet covering rectangular hole in
rear. (See instructions for drilling and cutting grommet to fit your cables on front side of this sheet.) Keyboard
cable is routed through slot on right side of inner frame beside the plastic door in front. Remove cover, insert cable
and replace cover. Mouse cable on a PC should exit through grommet in back panel to avoid crimping cable.
QCS3100: Cable from computer keyboard should be routed through grommet in bottom of monitor enclosure. (See
instructions for drilling and cutting grommet to fit your cables on front side of this sheet.)
QCS3200: Route cable from keyboard to computer keyboard through grommet in top of keyboard enclosure.
QCS3500: CAUTION ...In older models, height adjustable glides may interfere with fan housing and should not be set
less than 3" from bottom of housing.
QCS7000: Mount swing arm into vertical tube in rear center of work surface. Mount bottom monitor tray onto swing
arm. Place monitor on tray and hold down with Velcro strips. Route monitor cables through grommet in the bottom
of the monitor tray and back into the lower computer cabinet through grommet in the lower back panel.
NOTE: Cable extensions may be required depending on height of monitor and location of components in the large
enclosure. Keyboard cables to computer are routed through grommet located on the inside of the keyboard
enclosure at the back. Access is through the top, back panel. Adjust shelf in lower computer cabinet as
appropriate. Grommet at lower left of back panel is for surge suppressor cable and plug.
Miscellaneous
Description
4.5" 88/110 cfm Fan
Fan Guard for 4.5" Fan
Media Retainer for 4.5" Fan
Power Cord for Fan
Hips Bezel–14"/15" (old style)
Hips Bezel–14"/15" (new style)
Vivac Window & Tape (old style)
Vivac Window & Tape (new style)
Adjustable Glides–Long Stem
Neoprene Grommet–1" x 3" x 9"
Black Hips Work Surface–Model 7000
Acrylic Door –Model 7000
CPU Acrylic Door–QCS3000
CPU Acrylic Door–QCS3100
Filter/Media Assemblies
Description
30 PPI Filter for 3" Fan
45 PPI Filter for 3" Fan
60 PPI Filter for 3" Fan
100 PPI Filter for 3" Fan
30 PPI Filter for 4.5" Fan
45 PPI Filter for 4.5" Fan
60 PPI Filter for 4.5" Fan
100 PPI Filter for 4.5" Fan
Instructions for Individual Models
Replacement Parts for Enclosures
Qty/Pack
Part No.
1
1245
1
1249
1
1248
1
1371
1
0293
1
0340
1
2090
1
2091
1
1297
1
522
1
0670
1
1384
1
1757
1
1319
Qty/Pack
Part No.
5
1237
5
1240
5
1241
5
1244
5
1247
5
1251
5
1252
5
1255
®
HUBBELL
Workplace Solutions
Locks
Description
Inner Cam Lock for QCS3000
Link Lock for QCS3000
T–Handle Lock for QCS7000
Cam Lock for QCS7000 Keyboard
and Workstand Utility Trays
Neoprene Liners for QCS7000
Description
Liner for Work Surface
For Shelves
For Bottom
For Keyboard Tray
600 South Clark St.
Mayville, WI 53050
Phone: 920-387-4120
Fax: 920-387-4189
Qty/Pack
Part No.
1
1291
1
1309
1
1234
1
0828
Qty/Pack
Part No.
1
0514
2
0515
1
0516
1
0621
Part No. 2699.a
Publicidad
