Replace The Base Grille; Start The Icemaker - Crosley XSS23G Manual Del Propietario E Instrucciones De Instalación

INSTALLING THE REFRIGERATOR (Cont .)

REPLACE THE BASE GRILLE

7
Replace the grille by installing the two Phillips
head screws .
SET THE CONTROLS
8
Set the controls to the recommended
setting .
49-1000105 Rev. 0
Installation Instructions

START THE ICEMAKER

9
Set the icemaker power switch to the I (on)
position . The icemaker will not begin to operate
until it reaches its operating temperature of 15°F
(–9°C) or below . It will then begin operation
automatically . It will take 2–3 days to fill the ice
bin .
Power
switch
Power
switch
NOTE:
In lower water pressure conditions, the water
valve may turn on up to 3 times to deliver
enough water to the icemaker .
25