Troubleshooting; Sicherheitshinweise - Black+Decker FSMH13E5 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 20
ENGLISH
Press the steam operate button (2). After a few seconds,
u
steam will start to come out of the steam head.
Note! When first filled or after running dry, it can take up to 45
seconds for steam to be produced.
It takes a few seconds for steam to enter the cleaning pad.
u
The steam mop will now glide easily over the surface to be
sanitized/cleaned.
Push and pull the steam mop slowly across the surface to
u
thoroughly steam clean each section.
When you have finished using the steam mop, return
u
the handle (9) to the upright position, making sure that it
is supported and turn it 'OFF'. Wait until the steam mop
cools down (approximately five minutes).
Caution! It is important to monitor the water level in the water
tank (4). To refill the water tank and continue to sanitize/
clean stand the mop upright making sure that the handle is
supported and turn the steam mop 'OFF'. Unplug the unit from
the electrical wall outlet, refill the water tank (4).
Caution! Never leave the steam mop in one spot on any
surface for any period of time. Always place the steam mop
with the handle (9) supported in the upright position when
stationary and make sure the steam mop is turned off when
not in use.
After use (Fig. H)
Turn the steam mop 'OFF'. turn the steam operation
u
button (2) to off and then press the ON/OFF button (1).
Wait until the steam mop cools down.
u
Unplug the steam mop from the electrical wall outlet.
u
Empty the water tank.
u
remove the cleaning pad (7) and wash it ready for next
u
use.
Wrap the power supply cable around the tidy hook (10).
u
Technical Data
Voltage
V
ac
Power
W
Tank
ml
Capacity
Weight
kg

Troubleshooting

If your appliance seems not to operate properly, follow the
instructions below. If this does not solve the problem, please
contact your local BLACK+DECKER repair agent.
(Original instructions)
FSMH13E5
FSMH13E10
230
230
1300
1300
380
380
1,8
1,8
(Übersetzung der ursprünglichen
Anweisungen)
Problem
Step
The steam
1.
mop is not
turning on
2.
3.
The steam
4.
mop is not
producing
steam
5.
6.
Where can I
7.
get further
information/
accessories
for my steam
mop
(Übersetzung der ursprünglichen
Anweisungen)
Verwendungszweck
Ihr BLACK+DECKER
Dampfreiniger FSMH13E5,
TM
FSMH13E10 wurde zum hygienischen Säubern von
Bodenbelägen aus versiegeltem Hartholz, Laminat, Linoleum,
PVC, Keramikfliesen, Stein und Marmor entwickelt. Dieses
Gerät darf nur im Innenbereich verwendet werden und ist
nicht für den gewerblichen Einsatz vorgesehen.

Sicherheitshinweise

t
Warnung! Lesen Sie die
Anleitung "Sicherheit, Pflege
und Wartung" vollständig und
aufmerksam durch, bevor Sie
das Gerät verwenden. Lesen
Sie diese Anleitung vollständig
und aufmerksam durch, bevor
Sie dieses Gerät verwenden.
Sicherheit anderer Personen
Dieses Gerät darf von Kindern
u
ab 8 Jahren und Personen mit
eingeschränkten körperlichen,
DEUTSCH
Possible solution
Check the unit is plugged in at
the wall
socket.
Check the unit is switched on
using the ON/OFF switch (1)
Check the fuse in the plug.
Check the water tank (4) is full
.
NOTE: When first filled or after
running dry it can take up to 45
seconds for steam to be
produced.
Check the steam generation
button is in the ON position
(2).
The steamer is equipped with a
thermostat and a thermal
cut-out. If for any reason the
steamer overheats it will switch
off. If this happens turn off and
unplug the steamer, allow to cool
for 2 to 4 hours and re-try.
Refer to the assembly chapter of
the manual for correct fitting of
parts and accessories.
DEUTSCH
7

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Fsmh13e10

Tabla de contenido