Instructions For Use; Taking Videos And Photos; Video And Photo Preview; Waterproof Case Instructions - Nilox Manual De Instrucciones

INSTRUCTIONS FOR THE USE
MINI
CHARGING THE
When using the USB cable to connect the camera to the computer, the light will be red in the charging
process, and it will convert to no-light when the battery is fully charged

TAKING VIDEOS AND PHOTOS

Install the battery and memory card before the use, then press On/Off button for 2 seconds to turn the
camera on.
The device will automatically enter the standby interface;
When the card is first used it is recommended to format it pressing the formatting button for at least 3
seconds (please be careful: this operation will delete all saved data).
Press the Video Button to begin recording after formatting and press it again to suspend.
It will record afresh when pressed again.
A new video file will be created each time you press the Confirmation Button , but if you do not suspend,
the camera will go on recording for maximum 4gb each video until the memory card is full.
To take photos from video-standby mode press Mode Switching Button , which makes MINI cyclically
switch from video to photo and vice versa. Then press Photo Button . All the files will be stored in the
memory card automatically.

VIDEO AND PHOTO PREVIEW

Press the Switching mode button to enter the playback function.
Press then the Down Button to choose the file.
The video files can be displayed pressing the Confirmation Button .
If you want to stop and play the next files press the Confirmation Button to suspend and press the Down
Button again .
The Confirmation Button starts the playback.

WATERPROOF CASE INSTRUCTIONS

Open the wrench buckle of the waterproof case and make sure that the camera lens matches with the lens
window. After fastening the wrench buckle the camera is waterproof.
PLEASE NOTE
When used in water, do not open the waterproof cover. This action will cause serious damages,
which are not covered by warranty.
4