ASROCK X99E-ITX/ac Manual Del Usuario página 27

Power LED Header
(3-pin PLED1)
(see p.6, No. 6)
Serial ATA3 Connectors
(SATA3_0_1:
see p.6, No. 10)
(SATA3_2_3:
see p.6, No. 11)
(SATA3_4:
see p.6, No. 17)
(SATA3_5:
see p.6, No. 16)
Serial ATA Express
Connector
(SATAE_4_5:
see p.6, No. 15)
USB 2.0 Header
(9-pin USB3_4)
(see p.6, No. 8)
PLED-
PLED+
PLED+
1
SATA3_4 SATA3_5
SATA3_4
SATA3_5 SATAE_4_5
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
Please connect the chassis
power LED to this header
to indicate the system's
power status.
These six SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
The SATA3_4, SATA3_5
are shared with the
SATA Express connector
(SATAE_4_5).
* RAID is supported on
SATA3_0 ~ SATA3_5
ports only.
Please connect either
SATA or PCIe storage
devices to this connector.
The SATA Express
connector is shared with
the SATA3_4 and the
SATA3_5.
Besides two USB 2.0 ports
on the I/O panel, there
is one header on this
motherboard. This USB
2.0 header can support
two ports.
X99E-ITX/ac
25