IKEA UPPLEVA Manual Del Usuario página 14

/
use to select a modulation mode.
• Press OK to start initial setup relating to
all DVB-C digital and analogue channels.
Note: For some models, this option may not
be available.
─ Select Satellite.
• Press OK/ to enter.
• Press / to select Scan, then press
OK/ to enter the next step to configure
proper information relating to satellite and
antenna.
• Press OK to start initial setup relating to
all satellite channels.
Note: To prevent the channel setup process
from being interrupted, wait for the message
indicating that the setup is complete.
4. Before starting the scanning, you can
also select Skip Scan to skip the initial
setup process.
5. During the setup, you can follow the
instructions at the bottom of the screen
and return to the previous step by
pressing BACK. Or press
interrupt the search halfway.
6. Once the automatic search ends, the
TV enters the next step automatically.
Press / to select your location Shop
or Home. Press
selection and enter the last step.
7.
─ In this step, you can press OK to exit
the initial setup. The channels are
arranged in a preset order. If you wish to
skip channels, modify the preset order
or rename channels, select SETUP >
Organiser and press
─ In this step, you can also press BACK to
return to the previous step.
Automatically install channels
This section describes how to search and
store channels automatically. Instructions
are for both analogue and digital channels.
1. Press MENU on the remote control and
select SETUP > Language > Menu
Language. Press /
desired menu language.
2. Press BACK to return to SETUP, press
/ to select Country, then press
/ to select your country. The TV
installs and arranges channels
to your country.
3. Press / to select Tuner Mode, then
press / to select Antenna, Cable or
Satellite.
EXIT to exit or
OK/ to confirm your
OK/ to enter.
to select your
according
(For some models, this option may not be
avialable.)
─ Select Antenna.
/ to select Channel Install, and
• Press
press OK/ to enter.
• Select Automatic Search (Refer to
Figure 2.), then press
Automatic Search.
• Press OK to skip the country selection
and enter the next step. Or use
reselect your country, then press OK to
enter.
• Select Digital & Analogue, Digital or
Analogue, then press
automatic search, which relates to all
DVB-T digital and/or analogue channels.
─ Select Cable.
/ to select Channel Install, and
• Press
press OK/ to enter.
• Select Automatic Search, then press
OK/ to display Automatic Search.
• Press OK to skip the country selection
and enter the next step. Or use
reselect your country, then press OK to
enter.
Select Digital & Analogue, then press
─
OK/ to enter. Select your scan mode
if available and configure proper cable
information in the same way as in Initial
setup. Select Scan and press
start your automatic search relating to
all DVB-C digital and analogue channels.
─ Select Digital, then follow the same
process as above to start your automatic
search relating to all DVB-C digital
channels.
─ Select Analogue, then press
start your automatic search relating to
all analogue channels.
Select Satellite.
─
Note: For some models, this option may not
be available.
/ to select Satellite Setup, and
• Press
press OK/ to enter.
• Press / to select a proper satellite
or add new satellites if needed, then
press OK to enter and configure proper
information relating to satellite and
antenna.
• Select SETUP > Channel Install >
Automatic Search, then press
OK/ to enter.
─ Select Country, and use
your desired country, if necessary.
─ Select Satellite Tuning, press
12
OK/ to display
/ to
OK/ to start the
/ to
OK/ to
OK/ to
/ to reselect