IKEA UPPLEVA Manual Del Usuario página 20

Diagnostics on digital TV channels
1. Press MENU on the remote control and
select SETUP > Diagnostics.
OK/
2. Press to display some signal
information on the current digital
channel, such as signal strength,
frequency, etc.
Time Shift
Allows you to pause, rewind and forward
in a programme. The first time you use
this function, make sure to connect a USB
memory stick.
Note: Due to specific country requirements,
the Time Shift function is not available for
Finland.
1. Press MENU on the remote control and
select SETUP > Time Shift.
2. Press / to select On to switch on the
Time Shift function, then press
close the menu.
3. Press OPTION
and select Time Shift, then press OK to
confirm.
4. Follow the directions on the screen to do
the setup.
5. After the disk setup is done, press
OPTION and select Time Shift.
6. Press OK to display the Time Shift
menu.
─ Press the button to pause the picture
and begin the Time Shift.
─ Press the button to play the recorded
part.
─ When the Time Shift menu disappears
and only the timing of the Time Shift
remains on the screen, you can press
the button or OK to access the Time
Shift menu.
─ Press the button to fast backward or
the button to fast forward.
─ Press the button to quit the Time Shift
function.
Notes:
─ Before you connect the USB memory
stick to the TV, make sure you have
backed up the data in the device to
avoid the risk of losing important data
due to unforeseen malfunction.
─ We recommend you use a USB device
with free capacity above 1GB and disk
speed faster than 5.0MB/sec.
─ The bigger the file size for Time Shift,
the longer the recording time.
─ If you change the channel in Time Shift
EXIT
on the remote control
mode, a message prompts you to select
Yes or No. You can select Yes to exit
the Time Shift function and execute the
channel change.
Reset shop
Allows you to reset the TV to factory default
settings.
1. Press MENU
select SETUP, then press OK to confirm.
2. Select Reset Shop and press
enter.
3. Use the
password.
/
4. Press
confirm.
5. The Initial Setup menu appears. Follow
the related instructions.
to Customising the input settings
Allows you to configure your TV for external
input devices, such as a set-top box, Blu-
Ray player, computer or game console.
1. Press MENU on the remote control and
select SETUP > Input Settings.
2. Press OK/ to enter Input Settings.
3. Press /
device is connected to.
/
4. Press
Press /
device.
5. Press BACK to return to the SETUP
menu.
After configuring, the selected source label
will be displayed after the name of the
related connector in the source list when
pressing SOURCE
OK on the TV.
Use Electronic programme guide
EPG is an on-screen guide that displays
scheduled TV programmes. You can
navigate, select, view and record
programmes.
GUIDE
1. Press
Now and Next EPG menu will appear,
which allows you to get information
about the current or next programme
playing on each channel. Navigate
through the different programmes using
the navigation buttons on the remote
control.
2. Use the colour buttons to view the
8 Days EPG.
on the remote control and
digit buttons to enter the
to select OK and press OK to
to select the port the input
to select the type of device.
to assign a name to the
on the remote control or
on the remote control, the
18
OK/ to