Interpump ECO150 Manual De Instrucciones página 8

ELECTRIC ACTUATOR ASSEMBLY ON THE P.T.O.
• Check that the actuator has a sound seal "5" (otherwise replace it with a new
OR-RING 2131 CO-1930), then introduce it radially on the P.T.O. rod (fig. 5) and push
it completely in the centering seat (fig 6).
• Put the fastening bracket "4" in position, rotate it until it leans completely on the
screws (fig. 7).
• Orientate the actuator for preventing the contacts with other parts (follow the original
assembly orientation as much as possible).
• Tighten the screws "3", with the equipped key "6", at 7 Nm of torque (an incorrect
tightening can compromise the working and cause oil leakages).
• Connect the connecting electric cable "1".
Fig. 5
3
Fig. 7
180° 180
NOTE: In case of replacement of the KES05 with the new ECO150, the component
"4" (supplied in the kit) should be also replaced.
8
Electric actuator kit ECO150
2
5
3
4
Fig. 6
Fig. 8
3
3
4
1
2
6
code Y08ECO15000 - Upd. 10/2015
2