Environmental Protection - x-sense XS01-WR Manual Del Usuario

1. Verify the unit's alarm sound and indicator are working properly by testing the unit once a week.
2. As a minimum your smoke alarm should be cleaned once every 3 months: Remove the unit from the ceiling and
clean the alarm cover and vents with your vacuum cleaner fi tted with the soft brush attachment to remove dust
and dirt.
3. Never use detergents or other solvents to clean the unit.
4. Avoid spraying air fresheners, hair spray or other aerosols near the alarm.
5. Do not paint the unit. Paint will seal the vents and interfere with the sensor's ability to detect fi re.
6. Never attempt to disassemble the unit or clean inside. Doing so will void your warranty.
7. When removed, place the smoke alarm back in its proper location as soon as possible, to assure continuous
protection from fi re.
8. When household cleaning supplies or similar contaminants are used, the area should be ventilated.
Troubleshooting
PROBLEM SOLUTION
Your smoke alarm does not sound • Please check whether the alarm is properly attached to the mounting
during testing. bracket.
• Make sure you push the central test button fi rmly.
• Check the installation positioning. The wireless signal might be
blocked or out of range.
14
False alarms triggered intermittently • Check the location of your smoke alarm (see "Installation Positioning").
or when residents are cooking, taking
• Clean the smoke alarm (see "Maintenance").
showers, etc.
Red LED fl ashes and the alarm sounds The battery is low. Replace immediately.
one beep every 60 seconds.
Red LED fl ashes and the alarm sounds The alarm is malfunctioning. Please clean your smoke alarm, or replace
two beeps every 40 seconds.
immediately.

Environmental Protection

Waste electrical products should not be disposed of with household waste. Please recycle where
facilities exist. Check with Local Authority or retailer for recycling advice.
Manufacturer and Service Information
X-SENSE Technology Co., LTD.
Address: Tower B, Qiaode Technology Park, No. 7 Road, Guangming District, Shenzhen, Guangdong Province, China
Email: support@x-sense.com
15