Yamaha NX-P100 Manual De Instrucciones página 17

Problem
The handsfree function is not
available.
When a handsfree-ready device is
connected via Bluetooth
connection, its ringtone cannot be
heard from this unit.
USB
Problem
No sound.
Others
Problem
The power of the unit is turned off
unexpectedly.
The auto power off function does
not work.
Cause
The connecting device does not support HFP or HSP. Use a device that supports HFP or HSP.
The audio output of the device is not set to this unit.
Cause
The connecting device is not targeted at this unit.
A cable is connected to the AUX.
Cause
The auto power off function was activated.
This unit is connected via Bluetooth connection,
AUX, or USB with your PC.
TROUBLESHOOTING
Solution
Select this unit for the audio output by operating the
device.
Solution
Change the target of the connecting device to this unit
(NX-P100 Yamaha).
When a cable is connected to the AUX, the playback
from the AUX will take precedence. Remove the
cable from the AUX.
Solution
If this unit has been on without a Bluetooth
connection, AUX, or USB with your PC nor any
operation for ten minutes, the power of the unit will be
turned off automatically.
If, even while playing back music, this unit is left
unattended for eight hours, its power will be turned
off automatically.
Disconnect the Bluetooth connection, AUX, or USB
with your PC.
12