HoMedics FMS-255H Manual De Instrucciones E Información De Garantía página 6

Shiatsu masajeador seleccione pie con calor
Ocultar thumbs Ver también para FMS-255H:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Caution:
To avoid injury
and irreparable
damage, always
remain seated
when using
massager. Never
stand on the unit.
Fig. 1
NOTE: This unit may turn off after an extended period of use. If
your unit turns off (LED may remain on). If your unit overheats,
unplug the unit and let cool for 30 minutes before plugging in
again and continuing use.
Instructions for Use
To reduce the risk of electric shock, this unit is equipped with a
polarized plug (one blade wider than the other). This plug will fit
in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do not change the plug in
any way.
1. Plug into a 120-volt outlet.
2. It is highly recommended that the foot massager be used with
socked feet. Do not use the unit with shoes.
3. Place massager on the floor in front of your chair or seat.
4. To activate massage action, press Power
LED illuminator will glow blue (Fig. 1).
TIP: By changing the pressure of your feet on the massager, it
will change the feel of the massage. If the unit tickles you,
then you may need to apply more pressure or you may need
to become accustomed to the sensation. If the massage feels
too strong, you may need to lighten the pressure of your feet on
the unit.
5. To activate soothing heat with the massage, press the
Power button a second time. The LED illuminator will glow red
(Fig. 1). Allow a few moments for the heating action to warm up.
6. When finished, turn the unit "OFF" and unplug. "OFF" is
reached by pressing the Power
off (Fig. 1). (The first press of the power button turns on the
massage function; the second press turns on the soothing heat
function, and the third press turns the unit off.)
NOTE: As a safety feature, the soothing Heat function cannot be
used alone.
button until the unit turns
5
button once. The

Publicidad

Tabla de contenido
loading

Tabla de contenido