Specification; User Registration; Network Configuration - Carrier EU-OSK103 Manual Del Propietário

5. SPECIFICATION

Smart Kit Model
Standard
Antenna Type
Frequency
Maximum Transmitted
Power
Operation Temperature
Operation Humidity
Power Input

6. USER REGISTRATION

• Please ensure the mobile device has connected
to WLAN router. And the router has already
connected to Internet before registration and

network configuration.

12345678@gmail.com
① Click 'Create Account'. ② Enter your email
OSK102/EU-OSK103/
US-OSK103
IEEE802.11b/g/n
Printed PCB Antenna
WLAN: EU--
2412~2472MHz; US--
2412~2462MHz
19.8 dBm Max
0°C~45°C/32°F~113°F
10%~85%
DC 5V/300mA
Create Account
address and
password, and then
click 'Registration'.
7. NETWORK CONFIGURATION
CAUTION
• It is better to log in email box and active
registration account by clicking link in case forget
the password.
• Make sure the mobile connect to the WLAN
network.
• Make sure the mobile WLAN function works
well and can be connected to WLAN network
automatically.
• If the Smart Kit failed to connect to the router,
please confirm the encryption setting of router
should be WPA.
„ Set Air conditioner into AP mode
① Disconnect the power supply of Air conditioner.
② Connect the power supply of Air conditioner, press
the 'LED' button on the remote controller for 7
times continuously.
③ When the display show 'AP' and flash, it means
that the Smart Kit has already entered the WLAN
network setting mode.
• Some type of AC do not need the step to be in AP
mode.
7. NETWORK CONFIGURATION
Kindly reminder:
• When the air conditioner entered into WLAN
network setting mode, the remote controller can
not control the AC before the WLAN network
setting finished.
• If there is no setting operation under WLAN
network setting mode, the air conditioner will quit
this mode automatically 8 minutes later, then the
user can control the AC with remote controller
normally.
„ Add device to the account
Note: The configuration process is different for
Android system and iOS system mobile.
First, open the APP, sign in with the registered
account and password.
If the mobile is Android system, please follow the
process as below, if the mobile is iOS system,
please go to page 10 and follow the process.
GB- 4