ETI ST-8-90-840-SV-N Guía De Uso Y Cuidado página 3

BB
B
contInuous MountIng
1. Using a screwdriver, punch out the knock out hole on the sides of both fixture bodies (B).
2. Place the ends of the fixture bodies (B) together.
3. Insert either a 1/2 in. threaded coupler (not included) through both knock out holes and secure coupler with 2 threaded nuts
(not included) or insert flexible metal conduit with a snap-in connector through both knock out holes to connect the fixture
bodies (B).
4. Run jumper wires (not included) through the threaded coupler or use the wires in the metal conduit to connect the hot and
neutral (black and white) wires from one fixture body (B) to the next.
B
L N G
Jumper Wires
73.7"(1872mm)
Keyholes
Wire Connectors
L
N
G
BB
NOTe: Multiple light fixtures can be
connected, up to a maximum of 4 Lights. Do not
exceed 360 total watts for interconnected lights.
B
G
L N
BB
CC
L
N
G