Niko Nikobus Manual Del Usario página 21

05-09600
For mounting the touch screen against the wall, proceed as follows:
1. Screw the mounting plate to the wall, using the 2 screws provided. Make sure that
the plate is mounted correctly with respect to the flush mounting box.
2. Slide the touch screen in one smooth movement onto the mounting plate. The pivot
of the touch screen hooks into the mounting plate.
Niko advises to use Niko power supply 340‑00214 (Adjustable output voltage range) for
the touchscreen.
3. PROGRAMMING
All the programming is done via the PC software. The touch screen need not be connec‑
ted for the programming, only the feedback module has to be connected.
If you replace the touch screen, it does not have to be reprogrammed. The configuration is
automatically read back from the feedback module to the touch screen.
‑ Each touch screen in the system requires one feedback module.
‑ Per system you can connect up to 5 touch screens, and therefore 5 feedback mo‑
dules.
For the programming, refer to the software manual on the CD‑ROM provided.
EN 21