Conceptronic CHVIDEOCR Manual De Instrucciones página 13

5. Using the Conceptronic Home Video Creator
When the installation of the drivers and software is finished, you can start using the
Conceptronic Video Home Creator with the CyberLink software.
5.1 Capturing video
You can start the CyberLink PowerDirector software in various ways:
• Click on the "Start" button and select "All Programs", "CyberLink PowerDirector" and
click on "PowerDirector".
• Double-click on the "CyberLink PowerDirector" shortcut on your desktop.
When the CyberLink PowerDirector application is started, you will see the menu of the
software:
• Choose the tab "Capture" in the top left corner to go to the capturing screen.
• Click on "Settings" in the lower right corner and make sure "Capture device" is set to
"USB 2861 Device" and select the correct "Capture source" (Composite or S-Video).
Make sure the "Audio device" is set to "Line (USB Audio Device)" and click on "OK" to
save the settings.
• Press the red "Record" button and press "Play" on your capture device.
ENGLISH
13