Trevi XF 350 Guía De Uso página 11

BLUETOOTH
PAIRING
1. Place the speaker next to the Bluetooth device to be paired and switch on the device.
2. Press the MODE button (D) several times until "BLUE" appears on the display.
3. Follow the instructions of your external device to search for the speaker.
4. Search for the speaker named "XF 350" and enter the PIN "0000" if required.
5. A notification sound will be heard once pairing is completed.
Note: the Bluetooth speaker only works with one connection at a time, the connection
cannot be interrupted during normal operation.
CONTROLS AVAILABLE IN BLUETOOTH MODE
- Press the 9 (G) key once to go to the previous track, press the : key (I) once to go
to the next track.
- Press the  (H) button to pause, to resume music press  (H) again.
MICRO SD CARD / USB
1. Insert a Micro SD card or USB memory into the sockets (C) and switch on the device.
2. Playback will start automatically.
3. Press the 9 (G) key once to go to the previous track, press the : key (I) once to go
to the next track;
4. Press the  (H) button to pause, to resume playback press it again.
5. Long press the 9 (G) or : (I) keys to quickly scroll through a track.
Release the keys to return to normal playback.
6. Press the REPEAT button (F) or the RPT button (K) on the remote control to activate the
repeat function of the single track (ONE) or of all the tracks present (ALL).
7. Using the remote control, use the numeric keypad (D) to directly call up a track on the
memory.
LINE IN
1. Connect any unit equipped with an audio output using the appropriate 3.5mm Jack cable
to the LINE IN (B) input, press the MODE button (D) several times until "LINE" appears
on the display.
2. Adjust the external device from its commands.
DISCO-LIGHT EFFECTS
1. To activate the Disco-Light effects, set the switch (K) to the ON position.
2. To deactivate the Disco-Light effects, set the switch (K) to the OFF position.
USE OF THE MICROPHONE
1. Connect the supplied microphone to the MIC IN socket (J) and use the switch on the
handle to switch it on.
2. Adjust the microphone volume using the knob (O).
3. Adjust the ECHO effect of the microphone using the knob (N).
11