Before Putting Into Use; Tips For Energy Saving - Nevir NVR-5202 NSD Instrucciones De Operación

14) Do not store explosive substances such as aerosol cans with a flammable propellant in this
appliance.
Warning: This appliance can not be used in camping.
Warning: This appliance can not be used in public transportations.
Warning: The appliance shall be used for indoor only.
The refrigerant and insulation blowing gas are flammable. When disposing of the appliance,

do so only at an authorized waste disposal centre. Do not expose to flame.
Cleaning and user maintenance shall not be made by children without supervision.

Refrigerant
The refrigerant isobutene (R600a) is contained within the refrigerant circuit of the appliance, a
natural gas with a high level of environmental compatibility, which is nevertheless flammable.
During transportation and installation of the appliance, ensure that none of the components of the
refrigerant circuit becomes damaged.
Warning；Risk of fire/flammable materials
If the refrigerant circuits become damaged:
 Avoid open flames and sources of ignition.
 Thoroughly ventilate the room in which the appliance is situated.

BEFORE PUTTING INTO USE

 Before connecting the appliance to the power supply, let it stand for about 2 hours, which
will reduce a possibility of malfunctions in the cooling system due to transport handling.
 Clean the appliance, and be thorough, especially in the interior (See "HOW TO CLEAN").
 In case the interior accessories are not correctly placed, rearrange them as described in
chapter "NAME OF THE PARTS".
Instructions for Use
These instructions for use are intended for the user. They describe the appliance and its correct
and safe use. They were prepared for various types/models of fridges therefore you may find in it
description of some functions and accessories that your appliance does not have.

TIPS FOR ENERGY SAVING

 Try not to open the door too often, especially when the weather is wet and hot. Once you
open the door, mind to close it as soon as possible.
 Every now and then check if the appliance is sufficiently ventilated (adequate air circulation
around the appliance).
 Set thermostat from higher to lower settings as soon as possible (depends on how loaded the
appliance is ambient temperature etc).
 Before loading the appliance with packages of fresh foods, make sure they are cooled to
3