How To Install; Power Cord Replacement - Nevir NVR-5202 NSD Instrucciones De Operación

HOW TO INSTALL

Install fridge in a convenient location away from extreme heat and cold. Allow sufficient
clearance between the fridge and side wall so the door will open without obstruction. Fridge is
not designed for recessed installation.
Select a space with strong level floor.
Allow 5 inches of space between the fridge's side and the
The appliance must be correctly connected to the power

POWER CORD REPLACEMENT

If the refrigerator's power cord is damaged, have it
by a qualified repair agent.
WHAT TO DO ...
When the fridge is not in use for a prolonged period:
 Remove the power plug from the power point.
 Remove all contents from the fridge.
 Dry the interior and leave the door open for a few days.
When you wish to move the fridge:
 Secure all movable parts and contents. (Package them separately if necessary.)
 Transport the fridge only in an upright position. In any other position you may damage the
compressor.
Before calling service, please follow the checklist below.
This may save you an expensive service call.
If the fridge seems too warm inside:
 Check that the door has not been opened too frequently or for long.
 Check that the interior circulation is not obstructed by having too many goods stored. (The
fridge is overloaded)
 Did you store anything hot, without first cooling it to room temperature?
 Is there sufficient clearance around all sides and above the fridge?
If the fridge starts making any unusual noises:
 Is it wobbling? Re-level it and check if it now operates normally.
 Have any objects fallen behind the fridge? If so, remove them and check if operation is now
normal.
 Are any containers inside the fridge vibrating or resonating? If so, rearrange them then
check to see if operation has returned to normal.
7
wall.
supply.
replaced