EDM 03220 Instrucciones Importantes De Seguridad página 10

03220
REF.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
SOME PROBLEM AND SOLVED WAY
The load does not work:
a. Please check if the connection of power source and load is correct.
b. Please check if the load is good.
c. Please check if the settings of working light correspond to ambient light.
- The sensitivity is poor:
a. Please check if there is any hindrance in front of the detector to affect it to receive the signals.
b. Please check if the ambient temperature is too high.
c. Please check if the induction signal source is in the detection field.
d. Please check if the installation height corresponds to the height required in the instruction.
e. Please check if the moving orientation is correct.
- The sensor can not shut off the load automatically:
a. Please check if there is continual signal in the detection field.
b. Please check if the time delay is set to the maximum position
c. Please check if the power corresponds to the instruction.
WASTE
This symbol on the product or in the instructions means that your electrical and electronic equip-
ment should be disposed at the end of its useful life in a specialized container; do not dispose of in
the normal household waste container. There are special waste collection systems for recycling in
the EU. For more information, please contact the local authority or the retailer where you purchased
the product.
WARRANTY
The warranty period is 24 months from the date of purchase and covers all manufacturers failures in
material and quality. This warranty applies only if you have followed the instructions, and is void if
the unit has been forced or has been used improperly and inadequate, or if it has been repaired by
an unauthorized person.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
BILL IS THE PRODUCT WARRANTY
-3-