Sony PCS-G70S Manual De Instrucciones página 5

Connecting a Camera
This section describes how to connect a camera to this device. When
connecting the PSCA-CG70/CG70P standard camera unit, refer to the
supplied PCS-G70/G70P Operating Instructions.
to CTRL-S
Notes
• The functions on this device are identical to those on the PCS-G70/G70P.
However, if you connect a nonstandard camera, some or all of the functions
related to camera operation described in the PCS-G70/G70P Operating
Instructions and Operating Guide cannot be used. Also, the infrared picture
transfer function on the PCS-DS150/DS150P document stand cannot be
used. When using the PCS-DS150/DS150P, connect it to the AUX IN
connector on the communication terminal with an S-video cable.
• If the supplied remote control receiver is connected to the CTRL-S port when
you connect a PSCA-CG70/CG70P standard camera unit, the camera's own
remote control receiver cannot be used to operate the camera. To operate the
camera from its own remote control receiver, disconnect the supplied remote
control receiver from the CTRL-S port.
• If you are only connecting 1 PCS/PCSA series camera, make sure to connect
it to the MAIN CAMERA connector.
to VISCA IN
VISCA
cable
Remote
control
receiver
(supplied)
to VISCA
Plug
adaptor
(supplied)
MCU VIDEO OUT AUDIO OUT AUDIO IN
(MIXED) AUX LINE
MIC
(PLUG IN POWER)
1 2
1 2 3 4 5
DC 19.5V IR OUT 1 2
EC-MIC
AUX CONTROL RGB OUT
1 2 CTRL-S 1 2
AUX MONITOR
VIDEO OUT
Camera (BRC-300,
EVI-D100, EVI-
D70, etc.)
1 2 3 4 5 6 7 8 9
1 2 3
OFF ON
75 IR SELECT
VISCA RS-422
DC IN
EXT SYNC IN VIDEO S VIDEO IN VISCA RS-232C OUT
12V
to S VIDEO
S-video cable (supplied)
to VIDEO IN
to MAIN CAMERA
PCS-PG70/PG70P
MAIN SUB
CAMERA AUX IN CAMERA AUX IN
Communication
WHITE 100BASE-TX/
BOARD 10BASE-T
DSB
ISDN UNIT
Terminal
Connecting a Camera
GB
3
GB