Publicidad
Step 9
Carefully stand your unit upri ht.
å
Before fastenin the DOOR to your unit, be sure the
å
mountin screw is a ainst the stops as shown in the
dia ram. If it isn't, loosen the mountin screw to slide it
a ainst the stops. Then ti hten the mountin screw.
Fasten a DOOR (K) to the LEFT END (E) as shown in
å
the lower dia ram. Use the screws in the HINGES. You
should start each SCREW a few turns before completely
ti htenin any of them.
Fasten a KNOB (69K) and BACKPLATE (92K) to the
å
DOOR (K). Use a SILVER 1-1/2" MACHINE SCREW (95S).
Repeat this step for the other DOOR (K).
å
See the next step for DOOR adjustments.
å
SILVER 1-1/2" MACHINE SCREW
(2 used for the KNOBS and BACKPLATES)
www.sauder.com/service
Stop
Mountin
screw
Hin e
69K
92K
95S
K
E
418735
Pro Tip: Lift with your
le s. And, you know,
your arms.
Pa e 13
Publicidad
