Installation Instructions
REVERSING THE DOOR SWING (Cont.)
RE-HANGING THE DOORS
6
6 .1 Re-hang the fresh food door
6 .1 .1 Lower the fresh food door onto the
bottom hinge pin . Be sure the washer is
in place on the pin .
Hinge
Pin
6 .1 .2 Tilt the door towards the cabinet . As
the door is brought into position, align
the socket in the door with the hole
in the center hinge . Place the center
hinge pin into the hole in the center
hinge and tighten . Make sure the
washer is on the top of the hinge pin .
Hinge
Pin with
Washer
Center
Hinge
49-1000109
Plastic
Washer
RE-HANGING THE DOORS (CO
6
6 .1 Re-hang the fresh food door
6 .2 .1 Lower the freezer door onto the center
hinge pin . Be sure the washer is in
place on the pin .
Hinge
Pin
6 .2 .2 Tilt the door towards the cabinet, lifting
the top hinge so the pin fits into the
socket on the top of the door .
6 .2 .3 Make sure the door is slightly above
the top of the cabinet and the gap
between the doors is even across the
front . Tighten the top hinge screws . Do
not over-tighten these screws . Tighten
them until they are just snug, and then
turn them another one-half turn .
Top
Hinge
Hinge
Plastic
Washer
Gap
17