Blackstone 1605 Piezas Y Ensamblaje página 5

ST EP 0 2
First, assemble the upper and lower tank hangers with four (4) M6x38 bolts
and four (4) flange nuts.
Place the bottom tray in between the griddle legs and use one (1) large thumb-
screw to tighten it on the left.
ST EP 0 3
Use one (1) long thumbscrew to attach the assembled tank hanger and the
tray onto the unit. Then use on (1) M6x60 bolt and a flange nut to secure the
tank hanger.
28" Griddle Cooking Station | Parts & Assembly
!
WA R N I N G
The manufacturer has made every
effort to eliminate any sharp
edges. However, you should
handle all components with care
to avoid accidental injury.
Some parts may contain sharp
edges, especially as noted
in these instructions. Wear
protective gloves if necessary.
!
WA R N I N G
The use of alcohol, prescription
or non-prescription drugs may
impair the consumer's ability
to properly assemble or safely
operate the appliance.
!
C A U T I O N
Two people are recommended for
the assembly of this product.
03