Installation Options - BOCCHI 1602-0126 Serie Instrucciones De Instalación

Before you begin: cont.
• The sink, cabinet and frame shown in these instructions are generic and may not represent the actual
design or structure of your space or model.
• Due to the nature of granite sink installations, BOCCHI recommends that the sink installations be
performed by trained and experienced installers.
• All information in these instructions is based on the latest product information available at the time of
publication. BOCCHI reserves the right to make revisions in the design of products without notice, as
specified in the Price Book.
Preparation:
• Verify that the sink will fit in the cabinet and/or cover the existing sink cutout/opening.
• It is optional to install the strainer and faucet before installing the sink for ease of installation. Follow the
instructions provided by your faucet manufacturer to install the faucet.
• A template for the sink is included for easy cutout planning.
• NOTE: It is important to locate the correct line on the cutout for your model AND your installation method.
Templates provided have different cut lines for undermount versus drop-in installations.
• The countertop must be flat and level and not thicker than 1 1/2 inches. Be sure the countertop is fully
supported by the cabinet.
• If replacing a sink, measure the old sink and make sure the new BOCCHI sink will cover the cutout of the
old sink.
• Check that the water supply lines and drain lines are in good shape and quality for the new sink and faucet
installation. Replace if necessary.

Installation Options:

• NOTE: there are two types of installation: Undermount or Drop-In for models: 1602, 1604, 1606 and 1608.
• Determine your preferred installation method and follow the instructions for that installation type.
Sink ledge is fully
hidden under the
countertop
Undermount
www.BOCCHIUSA.com
Sink ledge is fully exposed
above the countertop
Drop-In
3