Tools And Materials; Before You Begin - BOCCHI 1602-0126 Serie Instrucciones De Instalación

Tools and Materials

Safety Glasses
Rags Utility Knife
NOTE: Special tools may be needed to install sinks in materials other than wood, granite, marble or quartz.
Hardware (included with the sink):
Undermount Hardware: Part No. 1600 0001
• All models= 1 Bag containing 10 Clips
Drop-In Hardware: Part No. 1600 0002
• Models 1606 & 1608= 1 Bag containing:

Before you begin:

CAUTION: Risk of personal injury or product damage. Handle with care. Sink edges can be sharp and
can cause injury to installer if not careful. Product can break, chip, cause injury or product damage if
handled carelessly. Get help lifting the sink.
• Read these instructions carefully before you begin this installation.
• Observe all local plumbing and building codes.
• Shut off the hot and cold water supplies.
• Inspect the drain and supply tubing. Replace if necessary.
• Prior to installation, unpack the new sink and inspect for damage. Carefully return the sink to its protective
carton until you are ready to install it.
• Due to the variety of installations possible with this sink, you may need to use procedures other than those
described.
2
Painter's Tape Pencil/Marker
Silicone
Sealant
6 x
Saw
Screwdriver
OR
Drop-In Hardware: Part No. 1600 0003
• Models 1602 & 1604= 1 Bag containing:
Tape Measure Hole Saw
Drill Hammer
10 x
continued on next page
www.BOCCHIUSA.com