General Setup - Rockband 3 PRO-DRUM Manual Del Usuario

TM
2
1
4
6
7
[4]
B B
A A
A A
C
D D
A Drum Pads
B Drum Stick Holder
E
C System Controller
D Adjustable Clamp
E Foot Pedal
3
5
USB Dongle
Press button to connect
8
Fig. 1
Foot pedal
Additional foot pedal.
Sold separately.
Color-coded plugs for cymbal cables
on back of Rock Band 3 drum kits
B.
A.
(D.)
A.

General Setup

1. Interlock interior clamp around ridge support on drum leg assembly (Fig. 2).
2. Tighten thumb screws to secure to leg clamp of drum kit.
3. Quick-release clips snap securely into place.
4. Insert metal poles and adjust height (Fig. 1).
5. Tighten thumb screws of metal poles (Fig. 2).
6. Add cymbal to pole based on cymbal configuration.
7. Screw on appropriate color wing nut (do not tighten completely if you want cymbal to tilt forward).
8. Loosen thumb screws that hold metal pole and rotate pole so that the cymbal is oriented to your style of play.
9. Retighten thumb screw that holds metal pole.
9A. (Optional) Loosen thumb screws around drum kit legs to rotate and adjust position of metal poles to
drum heads and retighten screws.
10. Connect cymbal cables to drum kit. Match cymbal color to cable jack.
TIP: Wrap cymbal cables around metal poles for cable management.
Color-coded wing nuts let you designate cymbals to preferred style of gameplay.
Fig. 2
1
Cymbal configuration:
A. Yellow = Hi-Hat Cymbal
2
B. Blue = Ride Cymbal
C. Green = Crash Cymbal
D.
Red = Crash Cymbal
(Lefty Mode)
C.
3
Wing nuts wing nuts
Fig. 3
Blue Yellow Green Red
A. B. C.
[5]