Caring For Your Iron After Use; Turning Off Your Iron; Storing Your Iron - Sunbeam DURA PRESS 4061 Manual Del Usuario

Caring for Your Iron After Use

Turning Off Your Iron

Turn the Steam Lever to 0/Off and Fabric Select
1.
Dial to Off.
Unplug the iron from the power source.
2.
WARNING: NEVER yank the power cord when
unplugging the iron. This can damage the cord.

Storing Your Iron

Allow the iron to cool.
1.
If you do not use your iron on a daily basis,
2.
empty the water reservoir after each use for
a longer iron life. To do so, unplug the iron, turn
the iron upside down, open the fill hole cover,
and allow water to flow from the fill hole. Shake
the iron gently to remove trapped water drops.
Loosely loop the power cord around the heel
3.
rest and store the iron on its heel rest.
Important: Wrapping the cord around the iron
too tightly can damage the cord.
Tip: When not ironing, always set the Steam Lever
to 0/Off and the Fabric Select Dial to Off.
8
after use
f