Steam Ironing; Using The Iron's Special Features; Spray Mist; Caring For Your Iron After Use - Sunbeam 3980 Manual Del Usuario

Steam Ironing

1. Follow the instructions for "Filling the Water Reservoir" on Page 6.
2. Plug the cord into a 120-Volt AC outlet.
3. Turn the Fabric Select dial to the Steam ironing fabric setting
you desire (Linen, Cotton or Wool) and allow the iron to heat
for 2 minutes. While the iron is heating, make sure it is sitting
on its heel rest on a stable, protected surface.
Tip: Refer to the Ironing Guide on Page 10 for the recommended setting
for your fabric.
4. After the iron has heated (2 minutes), turn the Steam dial to the
appropriate steam setting.
5. The Temperature Indicator Light remains on until the iron reaches
the appropriate temperature.
How To Use the Special Functions
S M ®
PRAY IST
The S M ®
PRAY IST
from heavy fabrics and for setting creases.
To use the S
PRAY
Press the S
PRAY

Caring for Your Iron After Use

T O
URNING
1. Turn the Steam dial to DRY and the Fabric Select dial to OFF.
2. Unplug the iron from the power source.
WARNING: NEVER yank the power cord when unplugging the iron,
this can damage the cord.
8 8 8
feature dampens the fabric to aid in removing wrinkles
®
M feature:
IST
®
M button firmly.
IST
Y I
FF OUR RON