3.3
Possible adjustments
L L L L
WARNING:
Risk of injury - Turn the electric wheelchair off before you perform any
adjustments.
L L L L
WARNING:
Risk of injury - Never perform any adjustments while you are driving.
L L L L
WARNING:
Risk of injury - Adjustments may only performed by your specialist
dealer.
L L L L
WARNING:
Risk of injury - Make sure all screws, levers are firmly secured
before driving with your electric wheelchair.
L L L L
CAUTION: Risk of clamping – Keep fingers, buckles and clothes away from the
attachment points or any moving parts.
3.3.1 Adjusting the armrests
The width of the armrests can be adjusted in horizontal direction.
3.3.2 Adjusting of the footrests
* Adjusting length:
L L L L
CAUTION:
Risk of damage – Avoid that the footrests make any contact with the
ground. Keep a minimum distance from 30 mm above the ground.
1. Loosen the hexagon socket set screws
just under the seat frame.
2. Move the armrest in an horizontal direction
until the correct position, by moving the
rectangular tubes
other. (Range 60 mm: step less)
3. Retighten the screws
4. Repeat instructions above for the other
armrest.
Check that the armrests are positioned
identically on both sides.
Adjust the length of the footrests as follow:
1. Remove the screw
footrests).
2. Adjust the length of the footrest to a comfortable
length (range: 120 mm, stepless).
3. Tighten the screw
Page 23
Express V
2013-06
and
over each
properly.
(on the back of the
properly.