Troubleshooting - Philips EXP511 Manual Del Usuario

Troubleshooting

WARNING
Under no circumstances should you try to repair the set yourself as
this will invalidate the guarantee.
If a fault occurs, first check the points listed, before taking the set for
repair. If you are unable to solve a problem by following these hints,
consult your dealer or service centre.
Problem
No power, playback
does not start
Hold indication
and/or no reaction
to controls
No sound or
bad sound quality
pls insert CD
or
No audio file
indication
Unfinalized CD
indication
28
Solution
– Insert the batteries correctly.
– Replace the batteries.
– Connect the mains adapter securely.
– Deactivate HOLD.
– Disconnect the set from the power supply
or take out the batteries for a few seconds.
– Press 2; to resume playback.
– Adjust the volume.
– Check and clean the connections.
– Keep this set away from active mobile
phones or strong magnetic fields.
– Insert a disc, label upwards.
– Clean or replace the disc.
– Wait until the steamed up lens has cleared.
– Make sure you have inserted an audio disc
or an MP3-CD.
– Make sure the inserted CDR or CDRW is
finalized.