How To Attach - Hamilton Beach Professional 63240 Manual Del Usuario

Power Hub Accessories

How to Attach:

Accessory Power
w WARNING
Moving Parts Hazard. To reduce the risk of personal injury, always unplug mixer before inserting or removing accessories.
1. Read Accessory Use and Care Guide before use.
2. Before inserting accessory into Power Hub Opening, set Speed
Control Dial to OFF ( ) and unplug.
3. Remove any Bowl Attachment. Never operate Stand Mixer with
both power hub accessory and Bowl Attachment installed.
4. Turn Power Hub Knob counterclockwise to lift Power Hub Cover
and let Power Hub Cover rest on Mixer Head. Ensure Power Hub
Knob cannot be seen in Power Hub Opening.
Hamilton Beach Professional Power Hub Accessories Available:
63245 Meat and Food Grinder
Lift up Power Hub
Hub
63246 Pasta Roller and Cutter Set
Power Hub
Opening
Cover
5. Insert Accessory Pin straight into Power Hub Opening, aligning
Tab on accessory with Tab opening near Power Hub Knob.
Turn Power Hub Knob clockwise to tighten and secure accessory
in place.
How to Remove:
1. Before removing accessory, make sure Stand Mixer is unplugged
and Speed Control Dial is set to OFF ( ).
2. Turn Power Hub Knob counterclockwise while holding accessory.
Pull accessory straight out of Power Hub Opening. Lower Power
Hub Cover and turn Power Hub Knob clockwise to lock.
Accessory Pin
Tab
Power Hub
Knob
Insert Accessory
63247 Slicer/Shredder
7