Motorola V3 GSM Manual Del Usuario página 21

If necessary, press # in a text entry screen to switch to
iTAP mode. An indicator tells you which mode is active (see
page 38). If iTAP mode is not set as the Primary or Secondary
entry mode, see page 37.
Entering Words in iTAP Mode
Press To
1 keypad keys show possible letter
(one press per combinations at the bottom of
letter) the display
2 S left or right
highlight the combination you
want
3 S up
accept the predicted word
completion, followed by a
space
or
*
enter the highlighted
combination, followed by a
space
or
SELECT (+) select the highlighted
combination, with no space
You can press keypad keys
to add more letters at the end
of the combination.
For example, if you press 7 7 6 4, your
phone displays:
Press DELETE
key to delete
last letter.
If you want a different word (such as Progress), continue
pressing keypad keys to enter the remaining characters.
Entering Novel Words in iTAP Mode
You may enter a word that the iTAP software does not
recognize. If your word is not shown as a letter
combination choice at the bottom of the display:
Action
1 Press DELETE (-) one or more times to delete
letters, until you see a letter combination at the
bottom of the display that matches the start of
the word you want to enter.
2 Press S left or right to highlight the letter
combination.
39 40
Press S
up to accept
Vj Msg 443
Program.
Prog ram
Press S right
to highlight
another
ProgProhSpoiProi combination.
Press * to
DELETE SELECT
enter Prog and
Press SELECT key to lock
a space.
highlighted combination.