Página 1
Square1 Collection | 418667 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Prefer the phone? Call 1-800-523-3987. English pg 1-18 Français pg 19-21...
Página 2
Assembly Tools Required Part Identifi cation No. 2 Phillips Screwdriver Tip Shown Actual Size Hardware Identifi cation Assembly Steps 5-18 Hammer Not actual size Français 19-21 Español 22-24 Skip the power trip. Safety 25-26 This time. Warranty Page 2 418667 www.sauder.com/services...
Use this part identifi cation to help identify similar parts. UPPER RIGHT END (1) TOP (1) DOOR (4) UPPER LEFT END (1) BOTTOM (1) ADJUSTABLE SHELF (2) LOWER RIGHT END (1) SHELF (1) BASE (1) LOWER LEFT END (1) BACK (2) DOOR MOLDING (4) www.sauder.com/services 418667 Page 3...
Página 4
METAL PIN - 8 SLEEVE - 8 COVER - 6 BLACK 9/16" LARGE HEAD SCREW - 13 BLACK 1-7/8" FLAT HEAD SCREW - 11 12S BROWN 1" FLAT HEAD SCREW - 12 BLACK 1/2" FLAT HEAD SCREW - 4 Page 4 418667 www.sauder.com/services...
Página 5
Look for this icon. It means a Step 1 video assembly tip is available at www.sauder.com/services/tips Assemble your unit on a carpeted fl oor or on the empty å carton to avoid scratching your unit or the fl oor. Push eight HIDDEN CAMS (1F) into the ENDS (A, B, C, å...
Página 6
Tighten Risk of damage or Arrow injury. HIDDEN CAMS must be completely Arrow Maximum tightened. HIDDEN 210 degrees CAMS that are not completely tightened may loosen, and parts may separate. To Minimum completely tighten: 190 degrees Page 6 418667 www.sauder.com/services...
Página 7
Fasten the SHELF (G) to the UPPER ENDS (A and B). Use å four BLACK 1-7/8" FLAT HEAD SCREWS (2S). Some assembly (and snacks) required. Finished edge r f a w i t l e s BLACK 1-7/8" FLAT HEAD SCREW (4 used in this step) www.sauder.com/services 418667 Page 7...
Página 8
Fasten the LOWER LEFT END (D) to the SHELF (G). å Tighten two HIDDEN CAMS. Maximum Arrow 210 degrees Minimum 190 degrees Finished edge i t h f a c S u r D E N H I D Page 8 418667 www.sauder.com/services...
Página 9
Fasten the BOTTOM (F) to the LOWER LEFT END (D). å Use two BLACK 1-7/8" FLAT HEAD SCREWS (2S). BLACK 1-7/8" FLAT HEAD SCREW (2 used in this step) Finished edge These holes must be here. www.sauder.com/services 418667 Page 9...
Página 10
Use two BLACK 1-7/8" FLAT HEAD SCREWS (2S). Minimum 190 degrees Finished edge i t h o f a c S u r D E N H I D BLACK 1-7/8" FLAT HEAD SCREW (2 used in this step) Page 10 418667 www.sauder.com/services...
Página 11
Rome. This can be built Fasten the BASE (K) to the LOWER ENDS (C and D). Use å in a day. two BLACK 1-7/8" FLAT HEAD SCREWS (2S). BLACK 1-7/8" FLAT HEAD SCREW (2 used in this step) www.sauder.com/services 418667 Page 11...
Página 12
Step 8 Insert the MAGNETIC CATCHES (2I) into the holes in the å TOP (E) and SHELF (G). For adjustments, turn the barrel counter-clockwise. Page 12 418667 www.sauder.com/services...
Página 13
fi rm pressure to turn the SCREWS into the BASE. These overlapping holes must line up over the SHELF (G) and the holes in the upper BACK (H). BLACK 9/16" LARGE HEAD SCREW (4 used for the METAL BRACKETS) www.sauder.com/services 418667 Page 13...
Página 14
(12 used in this step) The holes are closer to this edge. This surface will be facing the front of the unit. The holes are closer to this edge. This surface will be facing the front of the unit. Page 14 418667 www.sauder.com/services...
Página 15
HEAD SCREWS (11S). IMPORTANT: Only fasten one PIVOT HINGE to each DOOR in this step. BLACK 9/16" LARGE HEAD SCREW (4 used for the PIVOT HINGES) BLACK 1/2" FLAT HEAD SCREW (4 used for the STRIKE PLATES) www.sauder.com/services 418667 Page 15...
Página 16
NOTE: To make adjustments to the DOOR, loosen the SCREW in å the HINGE, make needed adjustments, and tighten the SCREW. Repeat this step for the remaining DOORS. å (4 used) BLACK 9/16" LARGE HEAD SCREW (4 used in this step) Page 16 418667 www.sauder.com/services...
Página 17
FLAT HEAD SCREW (2S) into a stud in your wall. BLACK 1-7/8" FLAT HEAD SCREW (1 used into a stud in your wall) BLACK 9/16" LARGE HEAD SCREW (1 used into the top of your unit) www.sauder.com/services 418667 Page 17...
Página 18
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry. å And to celebrate, why not share your success story? No load 25 lbs. (8 used) To cover HIDDEN CAMS 30 lbs. 25 lbs. 30 lbs. (6 used) (8 used) To cover screws Page 18 418667 www.sauder.com/services...
élément et conserver le livret pour future référence. EXTRÉMITÉ DROITE SUPÉRIEURE ....1 EXCENTRIQUE ESCAMOTABLE .....8 Pour contacter Sauder EXTRÉMITÉ GAUCHE SUPÉRIEURE .....1 CHEVILLE D'EXCENTRIQUE ......8 en ce qui concerne cet EXTRÉMITÉ DROITE INFÉRIEURE ....1 CONSOLE DE SÉCURITÉ ........1 élément, faire référence...
Página 20
ÉTAPE 3 Fixer la TABLETTE (G) aux EXTRÉMITÉS SUPÉRIEURES (A et B). Utiliser quatre VIS TÊTE PLATE 48 mm NOIRES (2S). ÉTAPE 4 Fixer l'EXTRÉMITÉ GAUCHE INFÉRIEURE (D) à la TABLETTE (G). Serrer deux EXCENTRIQUES ESCAMOTABLES. Page 20 418667 www.sauder.com/services...
Página 21
Essuyer. Utiliser quatre VIS TÊTE LARGE 14 mm NOIRES (1S). Fixer les PLAQUES DE BUTÉE (6I) aux MOULURES DE PORTE (L). Utiliser quatre VIS TÊTE PLATE 13 mm NOIRES (11S). www.sauder.com/services 418667 Page 21...
EXCÉNTRICO ESCONDIDO .......8 et conserver le livret pour future référence. EXTREMO IZQUIERDO SUPERIOR ....1 PASADOR DE EXCÉNTRICO ......8 Pour contacter Sauder EXTREMO DERECHO INFERIOR .....1 MÉNSULA DE SEGURIDAD .........1 en ce qui concerne cet EXTREMO IZQUIERDO INFERIOR ....1 SOPORTE DE METAL ..........2 élément, faire référence...
Página 23
Fije el ESTANTE (G) a los EXTREMOS SUPERIORES (A y B). Utilice cuatro TORNILLOS NEGROS DE CABEZA PERDIDA de 48 mm (2S). PASO 4 Fije el EXTREMO IZQUIERDO INFERIOR (D) al ESTANTE (G). Apriete dos EXCÉNTRICOS ESCONDIDOS. www.sauder.com/services 418667 Page 23...
Página 24
Fije las PLACAS DE CONTACTO (6I) a las MOLDURAS DE Esto completa el ensamblaje. Limpie con su pulimento para PUERTA (L). Utilice cuatro TORNILLOS NEGROS DE CABEZA muebles preferido o un paño húmedo. Seque con un paño. PERDIDA de 13 mm (11S). Page 24 418667 www.sauder.com/services...
Página 25
• Ne pas pousser le mobilier, surtout sur la être très lourd. moquette. Se faire aider par une autre personne pour soulever l’élément et le mettre en place. • Cette unité doit être placée contre un mur. www.sauder.com/services 418667 Page 25...
Página 26
• No empuje la unidad, especialmente sobre ser muy pesado. un piso alfombrado. Pide la ayuda de otra persona para levantar la unidad y colocarla en lugar. • Esta unidad debe ser colocada contra una pared. Page 26 418667 www.sauder.com/services...
GARANTIE LIMITÉE DE 1 AN 1. Sauder Woodworking Co. (Sauder®) off re une couverture de garantie limitée à l’ a cheteur 4. La présente garantie ne s’ a pplique qu’ a ux défauts garantis qui se produisent pour initial du présent produit pendant une période un an à...
Página 28
Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built. If you Nice.