Sauder Steel River Serie Instrucciones De Montaje
Ocultar thumbs
Ver también para Steel River Serie:
- Instrucciones de montaje (56 páginas) ,
- Instrucciones de montaje (36 páginas) ,
- Instrucciones de montaje (40 páginas)
Publicidad
Enlaces rápidos
CONTACT US FIRST
CONTACT US FIRST
sauder.com
sauder.com
sauder.com
BEFORE MAKING ANY RETURNS TO THE STORE.
BEFORE MAKING ANY RETURNS TO THE RETAILER.
sauder.com/service
Visit
Prefer the phone? Give us a ring at
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
Computer Desk
Steel River Collection | Model 427851
Sauder.com
Share your journey!
to order replacement parts, view video assembly tips, or chat with a live rep.
1-800-445-1527
.
For all your
newfangled gadgetry.
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-39
Français pg 40-43
Español pg 44-48
Lot # 558605
Purchased: __________________
12/17/20
Publicidad
Manuales relacionados para Sauder Steel River Serie
Resumen de contenidos para Sauder Steel River Serie
- Página 1 CONTACT US FIRST CONTACT US FIRST sauder.com sauder.com sauder.com BEFORE MAKING ANY RETURNS TO THE STORE. BEFORE MAKING ANY RETURNS TO THE RETAILER. sauder.com/service Visit to order replacement parts, view video assembly tips, or chat with a live rep. 1-800-445-1527 Prefer the phone? Give us a ring at Customer Service is available Monday-Friday - 9 a.m.
- Página 2 Table of Contents Assembly Tools Required Part Identification No. 2 Phillips Screwdriver Hardware Identification Tip Shown Actual Size Hardware Usage Guide Assembly Steps 6-39 Français 40-43 Español 44-48 Safety 49-50 Warranty Page 2 www.sauder.com/service 427851...
- Página 3 EE RAIL SUPPORT (4) SHELF (1) SMALL LEFT DRAWER SIDE (1) FF SKIRT (2) BOTTOM (1) SMALL RIGHT DRAWER SIDE (1) GG BACK BRACE (1) SMALL BACK (1) HH TOP BRACE (1) LARGE BACK (1) JJ FRONT BRACE (1) 427851 www.sauder.com/service Page 3...
- Página 4 2" PAN HEAD SCREW - 12 1-3/8" PAN HEAD SCREW - 20 7/8" PAN HEAD SCREW - 8 1" MACHINE SCREW - 3 1/2" PAN HEAD SCREW - 30 1/2" FLAT HEAD SCREW - 24 1/2" HEX HEAD SCREW - 8 Page 4 www.sauder.com/service 427851...
- Página 5 The arrow in the HIDDEN CAM must point Arrow toward the hole in the edge of the board. Hidden Cam Hole Insert the CAM SCREW or CAM DOWEL into the HIDDEN CAM. Tighten the HIDDEN CAM. 427851 www.sauder.com/service Page 5...
- Página 6 Step 1 Look for this icon. It means a video assembly tip is available at www.sauder.com/service/tips Find the numbered video or scan the QR code. å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor.
- Página 7 Step 2 å Fasten five SMALL BRACKETS (5) to the UPRIGHT FRAME (B). Use five 1/2" PAN HEAD SCREWS (18). 1/2" PAN HEAD SCREW (5 used in this step) 427851 www.sauder.com/service Page 7...
- Página 8 SMALL BRACKETS and into the UPRIGHT (F). å Fasten the UPRIGHT FRAME (B) to the UPRIGHT (F). Use three 2" PAN HEAD SCREWS (14). 1/2" PAN HEAD SCREW (3 used in this step) 2" PAN HEAD SCREW (3 used in this step) Page 8 www.sauder.com/service 427851...
- Página 9 å Fasten the LEFT END (E) to the LEFT FRAME (A). Use two 2" PAN HEAD SCREWS (14). 2" PAN HEAD SCREW (2 used in this step) 1/2" PAN HEAD SCREW (2 used in this step) 427851 www.sauder.com/service Page 9...
- Página 10 Fasten the remaining RAIL SUPPORT (EE) to the UPRIGHT (F). Use two 7/8" PAN HEAD SCREWS (16). 7/8" PAN HEAD SCREW (8 used in this step) Surface with more holes Surface with more holes Surface with more holes Page 10 www.sauder.com/service 427851...
- Página 11 NOTE: The EXTENSION SLIDES will be used later for the DRAWERS. Push the black lever in and pull the SLIDE from the RAIL. Open end 1/2" FLAT HEAD SCREW (6 used in this step) Open end 427851 www.sauder.com/service Page 11...
- Página 12 EXTENSION RAIL in to find the other hole that lines up with the hole in the RAIL SUPPORT. Turn a SCREW into this hole. Open end 1/2" FLAT HEAD SCREW (2 used in this step) Open end Page 12 www.sauder.com/service 427851...
- Página 13 EXTENSION RAIL in to find the other hole that lines up with the hole in the END. Turn a SCREW into this hole. Open end 1/2" FLAT HEAD SCREW (4 used in this step) Open end Arrow 427851 www.sauder.com/service Page 13...
- Página 14 1/2" HEX HEAD SCREW (3 used in this step) This hole must be closer to this edge. This hole must be closer to this edge. This hole must be closer to this edge. Page 14 www.sauder.com/service 427851...
- Página 15 Step 10 å Push two HIDDEN CAMS (3) into the SHELF (H). å Turn two CAM SCREWS (4) into the SHELF (H). Arrow 427851 www.sauder.com/service Page 15...
- Página 16 H I D D E N Edge with holes i t h f a c o l e S u r r e h 1-3/8" PAN HEAD SCREW (2 used in this step) Page 16 www.sauder.com/service 427851...
- Página 17 Use two 1/2" PAN HEAD SCREWS (18) through the BRACKETS and into the BOTTOM. D E N H I D i t h f a c S u r Open end 1/2" PAN HEAD SCREW (2 used in this step) 427851 www.sauder.com/service Page 17...
- Página 18 Step 13 å Push two HIDDEN CAMS (3) into the SMALL BACK (K). Arrow Page 18 www.sauder.com/service 427851...
- Página 19 Fasten the SMALL BACK (K) to the RIGHT END (G). Use two 1-3/8" PAN HEAD SCREWS (15). 1-3/8" PAN HEAD SCREW (2 used in this step) i t h o f a c S u r D E N H I D 427851 www.sauder.com/service Page 19...
- Página 20 Step Step 15 å Fasten four SMALL BRACKETS (5) to the RIGHT FRAME (C). Use four 1/2" PAN HEAD SCREWS (18). 1/2" PAN HEAD SCREW (4 used in this step) Page 20 www.sauder.com/service 427851...
- Página 21 Tighten three 1/2" HEX HEAD SCREWS (20) using the L-WRENCH (9). å NOTE: You should start each SCREW a few turns before completely tightening any of them. 1/2" PAN HEAD SCREW (4 used in this step) 1/2" HEX HEAD SCREW (3 used in this step) 427851 www.sauder.com/service Page 21...
- Página 22 Step 17 å Fasten the BRACES (GG, HH, and JJ) to the LEFT FRAME (A) as shown. Use five 1/2" PAN HEAD SCREWS (18). 1/2" PAN HEAD SCREW (5 used in this step) Page 22 www.sauder.com/service 427851...
- Página 23 Pro Tip: Lift with your å Fasten the BRACES (GG, HH, and JJ) to the UPRIGHT legs. And, you know, FRAME (B). Use five 1/2" PAN HEAD SCREWS (18). your arms. 1/2" PAN HEAD SCREW (5 used in this step) 427851 www.sauder.com/service Page 23...
- Página 24 Fasten the LARGE BACK (L) to the FRAMES (A and B) and TOP BRACE (HH). Use seven 2" PAN HEAD SCREWS (14). Arrow i t h o f a c S u r D E N H I D 2" PAN HEAD SCREW (7 used in this step) Page 24 www.sauder.com/service 427851...
- Página 25 Step 20 å Turn five CAM SCREWS (4) into the TOP (D). 427851 www.sauder.com/service Page 25...
- Página 26 Fasten the TOP (D) to the FRAMES (A and C) and MOLDING (S). Tighten seven 1-9/16" HEX HEAD SCREWS (13) using the L-WRENCH (9). å NOTE: You should start each SCREW a few turns before completely tightening any of them. 1-9/16" HEX HEAD SCREW (7 used in this step) Page 26 www.sauder.com/service 427851...
- Página 27 TOP (D). Tighten two 1/2" HEX HEAD SCREWS (20) using the L-WRENCH (9). å NOTE: You should start each SCREW a few turns before completely tightening any of them. 1/2" HEX HEAD SCREW (2 used in this step) 427851 www.sauder.com/service Page 27...
- Página 28 Step 23 å Turn four CAM SCREWS (4) into the KEYBOARD DRAWER FRONT (N). å Push four HIDDEN CAMS (3) into the KEYBOARD DRAWER SIDES (O and P), and KEYBOARD DRAWER BOTTOM (R). Arrow Arrow Page 28 www.sauder.com/service 427851...
- Página 29 Fasten the KEYBOARD DRAWER FRONT (N) to the KEYBOARD DRAWER SIDES (O and P) and KEYBOARD DRAWER BOTTOM (R). Tighten four HIDDEN CAMS. å Fasten a KNOB SET (6) to the KEYBOARD DRAWER FRONT (N). Use a 1" MACHINE SCREW (17). 427851 www.sauder.com/service Page 29...
- Página 30 Fasten two EXTENSION SLIDES (2) to the KEYBOARD DRAWER SIDES (O and P). Use four 1/2" FLAT HEAD SCREWS (19) through the holes shown in the enlarged diagram. Open end 1/2" FLAT HEAD SCREW (4 used in this step) Open end Open end Page 30 www.sauder.com/service 427851...
- Página 31 Step 26 å Turn four CAM SCREWS (4) into the SMALL DRAWER FRONT (T). å Push four HIDDEN CAMS (3) into the SMALL DRAWER SIDES (U and V). Arrow 427851 www.sauder.com/service Page 31...
- Página 32 å NOTE: Be sure the DRAWER BOTTOM (Y) inserts into the groove of the SMALL DRAWER FRONT (T). å Fasten a KNOB SET (6) to the SMALL DRAWER FRONT (T). Use a 1" MACHINE SCREW (17). Page 32 www.sauder.com/service 427851...
- Página 33 Fasten two EXTENSION SLIDES (2) to the SMALL DRAWER SIDES (U and V). Use four 1/2" FLAT HEAD SCREWS (19) through the holes shown in the enlarged diagram. Open end 1/2" FLAT HEAD SCREW (4 used in this step) Open end Open end 427851 www.sauder.com/service Page 33...
- Página 34 Step 29 å Turn four CAM SCREWS (4) into the LARGE DRAWER FRONT (Z). å Push four HIDDEN CAMS (3) into the LARGE DRAWER SIDES (AA and BB). Arrow Page 34 www.sauder.com/service 427851...
- Página 35 NOTE: Be sure the DRAWER BOTTOM (Y) inserts into the groove of the LARGE DRAWER FRONT (Z). å Fasten the remaining KNOB SET (6) to the LARGE DRAWER FRONT (Z). Use a 1" MACHINE SCREW (17). 427851 www.sauder.com/service Page 35...
- Página 36 Fasten the remaining EXTENSION SLIDES (2) to the LARGE DRAWER SIDES (AA and BB). Use four 1/2" FLAT HEAD SCREWS (19) through the holes shown in the enlarged diagram. Open end 1/2" FLAT HEAD SCREW (4 used in this step) Open end Open end Page 36 www.sauder.com/service 427851...
- Página 37 Step 32 å Push the FILE GLIDES (7 and 8) onto the LARGE DRAWER SIDES (AA and BB). If you're doing this to help a friend, don't leave without a bite. 427851 www.sauder.com/service Page 37...
- Página 38 The drawer will push in hard until it is all the way in, then it will slide in and out easier. å Peel APPLIQUES from the APPLIQUE CARDS (11) and stick them onto each visible HIDDEN CAM. Page 38 www.sauder.com/service 427851...
- Página 39 NOTE: Please read the back pages of the instruction booklet for important safety information. å This completes assembly. Clean with a damp cloth. Wipe dry. And to celebrate, why not share your success story at sauder.com or 15 lbs. 5 lbs.
- Página 40 DESCRIPTION QUANTITÉ REFERENCE DESCRIPTION QUANTITÉ conserver le livret pour future référence. Pour contacter Sauder en CADRE GAUCHE ............1 (ENSEMBLE DE GLISSIÈRE ILLUSTRÉ À PART) ce qui concerne cet CADRE DE MONTANT ..........1 GLISSIÈRE D'EXTENSION ........6 élément, faire référence CADRE DROIT ..............1 COULISSE D'EXTENSION ........6...
- Página 41 Enfoncer deux EXCENTRIQUES ESCAMOTABLES (3) Fixer l’ a utre SUPPORT DE RAIL (EE) au MONTANT (F). Utiliser dans la TABLETTE (H). deux VIS TÊTE GOUTTE DE SUIF 22 mm (16). Faire tourner deux VIS D'EXCENTRIQUE (4) dans la TABLETTE (H). 427851 www.sauder.com/service Page 41...
- Página 42 REMARQUE : Il est préférable de donner quelques tours de REMARQUE : Il est préférable de donner quelques tours de tournevis à chaque VIS avant de les serrer toutes à bloc. tournevis à chaque VIS avant de les serrer toutes à bloc. Page 42 www.sauder.com/service 427851...
- Página 43 TIROIR (U et V). Utiliser quatre VIS TÊTE PLATE 13 mm (19) à Ceci complète l'assemblage. Nettoyer avec un tissu humide. Essuyer. travers les trous comme l'indique le schéma agrandi. 427851 www.sauder.com/service Page 43...
- Página 44 Si SEPARADO) MARCO DE PARAL .............1 necesita ponerse en RIEL DE EXTENSIÓN ..........6 MARCO DERECHO ............1 contacto con Sauder en CORREDERA DE EXTENSIÓN ......6 cuanto a esta unidad, PANEL SUPERIOR ............1 EXCÉNTRICO ESCONDIDO ......23 refiérase al número EXTREMO IZQUIERDO ..........1...
- Página 45 PARAL (F). Utilice seis TORNILLOS DE CABEZA REDONDA de 22 mm (16). Dé vuelta el PARAL (F). Fije el otro SOPORTE DE RIEL (EE) al PARAL (F). Utilice dos TORNILLOS DE CABEZA REDONDA de 22 mm (16). 427851 www.sauder.com/service Page 45...
- Página 46 TORNILLOS DE CABEZA REDONDA de 13 mm (18) por entre los apretar cualquier tornillo firmemente. SOPORTES y en el FONDO. PASO 17 Fije las RIOSTRAS (GG, HH y JJ) al MARCO IZQUIERDO (A) como se muestra. Utilice cinco TORNILLOS DE CABEZA REDONDA de 13 mm (18). Page 46 www.sauder.com/service 427851...
- Página 47 Empuje cuatro EXCÉNTRICOS ESCONDIDOS (3) en los LADOS HEXAGONAL de 13 mm (20) utilizando la LLAVE EN L (9). DE CAJÓN PEQUEÑO (U y V). NOTA: Debe apretar cada TORNILLO unas vueltas antes de apretar cualquier tornillo firmemente. 427851 www.sauder.com/service Page 47...
- Página 48 NOTA: Asegúrese de que el FONDO DE CAJÓN (Y) ajuste dentro de la ranura de la CARA DE CAJÓN GRANDE (Z). Fije el otro JUEGO DE PERILLAS (6) a la CARA DE CAJÓN GRANDE (Z). Utilice un TORNILLO PARA METAL de 25 mm (17). Page 48 www.sauder.com/service 427851...
- Página 49 à Les téléviseurs peuvent être particulièrement un téléviseur. cet effet. lourds. De plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. 427851 www.sauder.com/service Page 49...
- Página 50 Además, el peso y la ubicación del tubo de imagen tienden a causar la inestabilidad de televisores y propensa a volcarse hacia adelante. Page 50 www.sauder.com/service 427851...
- Página 51 à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
- Página 52 BEFORE MAKING ANY RETURNS TO THE RETAILER. So, how did it go? Dear Valued Customer: Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built.