Maintenance And Cleaning - Blumfeldt Heat Guru Manual Del Usuario

EN
16

MAINTENANCE AND CLEANING

Maintenance
Careful and regular maintenance of Infrared Heater is required to attain a long
and efficient operation of your appliance.
• Check the cleanliness of the Reflector and IR-Filament at least once a
month. If necessary, apply cleaning and maintenance instructions.
• The number of checks may be increased considering the amount of
dust in the environment.
• Check the deformation of the Reflector, Wire and Frame visually
while cleaning the appliance. In case of any deformation, consult a
qualified technician.
• Check the power cable and plug visually while cleaning the appliance.
In case of any deformation, consult a qualified technician.
• It is recommended to change the reflector every 2 years for more
efficient operation.
Cleaning
Regular and careful cleaning helps your heater to operate efficiently for many
years.
• Unplug your power cable for your safety before cleaning your
appliance.
• Take out the front grid wire through the inlets on the frame using a
slotted
• screwdriver.
• The reflector and filament must be cleaned with a soft cloth, a smooth
brush
• or cool or dry air. The cloth may be damp but never too wet and the
cleaner
• should not include any chemicals.
• Refrain from using cleaning materials likely to damage the reflector.
(cleanser etc.)
• Reinsert the wire grid using a slotted screwdriver.