Handling and operation
Switching the headphones on/off
♦
Press the
phones. You will hear a beep and the operating/charging LED
up violet for approx. 2 seconds. The operating/charging LED
flashes alternately orange and blue.
The headphones are now in pairing mode.
♦
To switch off the headphones, press the
2 seconds until you hear a beep and the operating/charging LED
goes out.
Wearing the headphones
♦
When putting the headphones on, please note the markings "R" (right)
and "L" (left) on the inside of the adjustable head band
♦
Adjust the headband
earpieces
Pairing/unpairing the headphones with a Bluetooth
device
Before you can use the headphones with the Bluetooth
them with a compatible Bluetooth
♦
Switch on the headphones as described above to activate pairing mode.
♦
Set the Bluetooth
devices. A detailed description of how to do this can be found in the
operating manual for your Bluetooth
Select the entry SKHK 40 C1 from the list of devices found on your
♦
Bluetooth
connect the two devices. If the pairing is successful, you will hear a rising
series of beeps and the operating/charging LED
3-second intervals.
♦
To terminate the Bluetooth
function on the Bluetooth
Bluetooth
ing/charging LED
are now in pairing mode again.
♦
Alternatively, switch the headphones off as described above to deacti-
vate the Bluetooth
│
GB │ IE
■
10
5
button
for about 2 seconds to switch on the head-
1
so that it fits your head comfortably and the
2
cover your ears.
playback device so that it scans for Bluetooth
®
playback device and, if required, enter the code 0000 to
®
®
pairing button
®
0
flashes orange and blue alternately. The headphones
function.
®
device.
®
playback device.
®
connection, either disable the Bluetooth
®
playback device or hold down the
7
for about 2 seconds until the operat-
0
0
5
button
again for about
1
.
function, you must pair
®
0
flashes blue twice at
SKHK 40 C1
lights
then
0
®
®
®