I Capacitances [ ]; I Frequencies [Hz] - Chauvin Arnoux C.A 5220G Manual De Empleo

CAPACITANCES
I Never measure a capacitance on a live circuit.
I Always respect the polarity of electrolytic condensors.
This type of condenser may be sensitive to temperature,
so avoid touching it during measurement.
I Connect the leads to the multimeter and to the terminals of the condenser.
I Place the selector switch on the capacitance meter function
I Automatic range selection : read the measured value
NB : The bargraph is not operational during capacitance measurement.
I Memorise the value, if necessary, by pressing the HOLD button.
If necessary, press the following buttons :
I RANGE to select the ranges manually
I
to light the display
I MIN.MAX to read the min or max values
CAPACITANCES
4 nF
(1)
Resolution 1 pF
± 3 % R ± 3 % R
Precision ± 400
counts
Protection 500 V rms and 750 V peack
(1) Min measurement : 400pF.
FREQUENCIES
I Connect the leads to the multimeter and in parallel to the circuit to be tested.
I Place the selector switch on the Hz voltage frequency function
I Automatic range selection : read the measured value
NB : The bargraph is non-operational on frequency measurement
I If necessary, press the following buttons
- MIN.MAX to read the max or min value
- to light the display
40 nF 400 nF 4 µF
10 pF 100 pF 1 nF
± 5 % reading ± 15 % R
± 25 ± 10 counts
counts
22
.
40 µF
10 nF
± 10
counts