Skywalker Trampolines SKYWALKER SPORTS STT100 Manual Del Usario página 9

STEP 6
7 Limit 9 M8x18mm
Frame (x2) Bolts (x4)
STEP 7
8 M6x15mm
13
Cushion (x2)
Bolts (x2)
17 M8 Spring
16 M8 Washers
Washers (x4)
(x4)
LAST STEP YOU'RE IN THE FINAL HOME STRETCH. Install the cushion (8)
to the limit frame (7) using one M6x15mm bolt (13). Repeat this step on
the other side of the teeter totter.
Note: Make sure all the bolts in the steps above are tightened.
This step may look complicated, but it's a
piece of cake. Just install the limit frame
(7) to the seat pole assembly (4) using
two M8x18mm bolts (9), two M8 spring
washers (17), and two M8 washers (16).
Repeat this step on the other side!
9
(4)
(16) (17)
(9)
(7)
(7)
(8)
(13)